pulse/docs/VM_DISK_MONITORING.md

💾 VM Disk Monitoring

Pulse can read filesystem usage inside a Proxmox VM through the QEMU Guest Agent. Allocated virtual-disk size is not the same as used space inside the guest. LXC filesystem collection uses a different path.

Backup safety

Do not run manual guest-agent probes during a backup, freeze or thaw. A guest-agent request is an active command on the same channel used by freeze-enabled backups, even when it only reads disk or memory information. There is a report of a VM remaining frozen despite an OK backup task. The reported command-ID collision is not established as a reproduced cause.

If your installation is affected, stop the Pulse service before the backup and restart it only after independently confirming the guest has thawed, using your existing guest console or workload checks. Pulse monitoring and alerts are unavailable while it is stopped. An OK backup task or an absent VM lock does not prove thaw succeeded. This is a temporary precaution, not a claim that the monitoring defect is fixed.

Do not test freeze/thaw commands, clear backup locks, disable backup freezing or force-reset a guest as a disk-monitoring diagnostic. Those operations can affect workloads or backup consistency. Preserve the existing backup task and redacted error, rather than repeat a potentially harmful backup for a report.

Pause Pulse for a planned freeze-enabled backup

This manual precaution is for an affected systemd installation, before a scheduled backup starts. It is not a recovery procedure for a backup already in progress or an unresponsive guest, and not an automatic backup hook.

1. Identify the Pulse server service. Run these commands on the machine running the Pulse server: for Proxmox LXC, inside the Pulse LXC, not the Proxmox host or the backed-up VM. The examples use pulse.service; substitute your actual server unit throughout (pulse-backend.service on some older installs), not pulse-agent.service.

   systemctl show pulse.service --property=LoadState,ActiveState,MainPID
   

   Require LoadState=loaded and record whether Pulse was active. If the unit is missing, do not assume monitoring has stopped: identify your deployment's actual stop control. Docker and other supervisors need their own controls.

2. Prevent an update from starting Pulse again. Do not install or update Pulse during this window. If you use unattended updates, inspect the actual matching timer (the default is pulse-update.timer):

   systemctl show pulse-update.timer --property=LoadState,ActiveState
   

   Record whether the timer was active. For a loaded timer, pause it and check both it and its update service, substituting your actual unit names:

   sudo systemctl stop pulse-update.timer
   systemctl show pulse-update.timer pulse-update.service \
     --property=Id,LoadState,ActiveState,MainPID
   

   The timer must be inactive. If the update service is active, activating or deactivating, let it finish normally before continuing. Do not interrupt an installation. A missing update unit is not proof that a custom updater is idle; check your deployment's update controls too.

3. Stop Pulse and confirm it is stopped, before the backup starts.

   sudo systemctl stop pulse.service
   systemctl show pulse.service --property=LoadState,ActiveState,MainPID
   

   Require LoadState=loaded, ActiveState=inactive and MainPID=0 after a successful stop. Do not start the backup if the stop fails, the state is unknown or another Pulse server is still polling the affected guests. Pulse monitoring and alerts are unavailable while stopped. Do not run an update, start another Pulse instance or reboot its host during the pause.

4. Verify the guest independently, then restore only what you paused. Keep Pulse stopped until the backup has ended and your established guest-console or workload checks confirm thaw, including fresh successful workload writes to the filesystems covered by the backup. A console connection or a successful read alone is not enough. If thaw cannot be confirmed, leave Pulse stopped and use the guest/platform's recovery procedure; do not repeat the backup or use guest-agent probes to test it.

   Only after that confirmation, if Pulse was active beforehand:

   sudo systemctl start pulse.service
   systemctl is-active pulse.service
   

   active confirms service startup, not proof that polling or alerts have recovered. Check normal observation times in Pulse without Run Diagnostics or manual guest-agent probes. Restore the update timer only if it was active beforehand, after Pulse has started:

   sudo systemctl start pulse-update.timer
   

   Leave previously inactive services/timers inactive. Arrange independent outage coverage and repeat the precaution for each affected backup window; this manual sequence does not schedule future pauses or prove a fix.

🚀 Setup

Plan changes outside backup windows and follow the guest's normal maintenance procedure; a reboot interrupts its workloads.

1. Install the guest agent inside the VM. Use the guest OS's supported package: qemu-guest-agent on Linux, or the QEMU Guest Agent service from the virtio-win distribution on Windows.
2. Enable it in Proxmox. Review VM Options → QEMU Guest Agent and apply any required VM restart in that maintenance window.
3. Check the existing observations. In Pulse, hover over the disk dash or open the resource details for the collection explanation and observation time. Check the guest-agent service from inside the guest, not by repeatedly sending qm agent commands from the hypervisor. A configured agent is not proof it responded, and a retained disk value is not proof of a fresh poll.

⚙️ Permissions

Use the dedicated account and token actually configured for that Pulse connection, not a guessed account name. Review their effective privileges for the affected VM; a host-root diagnostic does not test the API token's access.

Collection	Proxmox VE 9+	Proxmox VE 8
Filesystem usage and guest information	VM.GuestAgent.Audit	VM.Monitor
Reading guest memory via /proc/meminfo	Also VM.GuestAgent.FileRead	VM.Monitor

Do not grant Administrator or guest execution/write permissions to diagnose a missing disk value. The built-in PVEAuditor role cannot be modified; use a custom monitoring role if the required read privileges are absent.

🔧 Troubleshooting

Observation	Useful next check
Disk shows “-”	Read its explanation and observation time. Check the owning host, current VM options, guest-local service and configured API token access.
Permission denied	Review the token and account's effective read privileges on that VM, including privilege-separated token ACLs. A successful root command would not disprove this error.
Timeout or backup lock	Check the existing backup/task timeline and guest workload locally. Defer active guest-agent probes; increasing a timeout is not a contention or thaw repair.
Rocky Linux / RHEL memory missing	Review /etc/sysconfig/qemu-ga inside the guest. File-read restrictions can explain memory collection failure; they do not by themselves prove why filesystem usage is absent. Change the guest's allowlist or restart its agent only through your normal maintenance procedure, outside backups.
Windows service stopped	Check the QEMU Guest Agent service inside Windows. Schedule any restart outside backups.

Passive host preflight

The current scripts/test-vm-disk.sh helper reads only local VM status and current configuration, with bounded timeouts. It sends no guest-agent commands, reads no guest files, and changes no service, lock or ACL. Use it on the VM's owning Proxmox host with an account permitted to read that local configuration (normally through sudo).

Use a reviewed checkout containing this passive helper. Inspect the file before running it: older copies send ping and get-fsinfo to the guest. Do not pipe a network download into a root shell.

# From the reviewed Pulse checkout; replace 100 with the affected VM ID.
sudo bash ./scripts/test-vm-disk.sh 100

The output distinguishes the running/stopped state, agent configuration and a reported backup/other lock without dumping the full VM configuration. A missing or unreadable lock is not permission to probe the guest: a backup can start immediately after the read. A non-zero exit means a required read failed or the response could not be interpreted; it is not an empty or healthy result. A successful preflight does not verify disk freshness, guest-agent responsiveness or thaw.

Keep only the relevant time, Pulse and Proxmox versions, observation/error and backup task sequence for a report. Redact private VM names, paths and addresses; never include credentials, full VM configuration, service environments or a whole host journal. See Getting help.

📝 Notes

• Network mounts: NFS/SMB mounts are excluded from filesystem usage.
• Databases: Filesystem usage can differ from database-internal metrics.
• Containers: LXC collection does not use the VM's QEMU Guest Agent.