pad/docs/backup.md

Backup & Restore Guide

Overview

Pad provides built-in tooling for database backup, restore, and migration between SQLite and PostgreSQL.

Command	Description
pad db backup	Database backup — SQLite (VACUUM INTO, default) or PostgreSQL (pg_dump)
pad db restore <file>	Database restore — SQLite (file copy) or PostgreSQL (psql)
pad db migrate-to-pg	One-time SQLite → PostgreSQL migration
pad workspace export	Application-level JSON export (portable)
pad workspace import	Application-level JSON import

pad db backup / pad db restore auto-detect the driver: PostgreSQL when PAD_DB_DRIVER=postgres (or PAD_DATABASE_URL is set), SQLite otherwise. The SQLite database path is resolved exactly as the server resolves it — PAD_DB_PATH > PAD_DATA_DIR/pad.db > ~/.pad/pad.db — so it works inside the Docker image (which sets PAD_DATA_DIR=/data) without extra flags.

SQLite Backups

SQLite stores everything in a single file (default: ~/.pad/pad.db). The canonical, online-safe way to back it up is pad db backup:

# Online-safe single-file backup via VACUUM INTO (safe while the server runs)
pad db backup -o ~/backups/pad-$(date +%Y%m%d).db

# Omit -o to get a timestamped pad-backup-YYYYMMDD-HHMMSS.db in the cwd
pad db backup

pad db backup uses SQLite's VACUUM INTO, which reads a consistent snapshot through the SQLite engine and writes a single fully-checkpointed file — no -wal/-shm sidecars to juggle, and no torn copy if the server is mid-write. The database path is resolved the same way the server resolves it (see above), so no --from/path flag is needed.

Docker

Inside the official image (PAD_DATA_DIR=/data), run the backup through the container so it resolves /data/pad.db automatically:

# Write the backup to the mounted /data volume, then copy it off-host
docker exec <container> pad db backup -o /data/backup.db
docker cp <container>:/data/backup.db ./pad-backup.db

Avoid cp-ing pad.db out from under a running server — a plain file copy can tear against in-flight WAL writes and silently lose the -wal contents.

Restore

# Stop the server first — restore refuses to run while it detects a live
# server (a running WAL checkpoint could clobber the restored file).
pad server stop
pad db restore ~/backups/pad-20250101.db
pad server start

Restore writes the backup over the resolved database path and clears any stale -wal/-shm sidecars. Use --force to skip the confirmation prompt and override the live-server guard (not recommended while the server is running).

PostgreSQL Backups

Manual Backup

# Create a SQL dump
pad db backup

# Specify output file
pad db backup --output /backups/pad-backup.sql

Requires:

• pg_dump installed
• PAD_DATABASE_URL environment variable set

Automated Backups (Cron)

# Add to crontab: daily backup at 2 AM
0 2 * * * PAD_DATABASE_URL="postgres://pad:secret@localhost:5432/pad" /usr/local/bin/pad db backup --cron --output /backups/pad-$(date +\%Y\%m\%d).sql

The --cron flag uses structured log output suitable for log aggregation systems.

Both PostgreSQL commands accept postgres:// / postgresql:// URIs and libpq keyword/value connection strings in PAD_DATABASE_URL. Database passwords are passed to the native client through its environment, not its arguments. For a PostgreSQL service configuration, keep the password in that service rather than also supplying an inline password; service settings override environment defaults. Likewise, configure an SSL key passphrase (sslpassword) in a service file, since libpq has no corresponding environment variable.

Restore

# Restore from backup (will prompt for confirmation)
pad db restore /backups/pad-backup.sql

# Skip confirmation (for automated restore)
pad db restore --force /backups/pad-backup.sql

Cloud Database Snapshots

For managed PostgreSQL (AWS RDS, Google Cloud SQL, Azure Database):

• AWS RDS: Use automated backups + manual snapshots via the AWS Console or CLI
• Google Cloud SQL: Enable automated backups in instance settings
• Azure: Configure automated backups via the portal

These are generally preferred over pg_dump for large databases as they use filesystem-level snapshots.

Migrating SQLite → PostgreSQL

When graduating from a local SQLite setup to production PostgreSQL:

# 1. Set up PostgreSQL and create the database
createdb pad

# 2. Run Pad once against PostgreSQL to create the schema
PAD_DB_DRIVER=postgres PAD_DATABASE_URL="postgres://pad:secret@localhost:5432/pad" pad server start &
# Wait a few seconds for migrations to run, then stop it
kill %1

# 3. Migrate workspace data
pad db migrate-to-pg \
  --from ~/.pad/pad.db \
  --to "postgres://pad:secret@localhost:5432/pad"

# 4. Create an admin account on the new database
PAD_DB_DRIVER=postgres PAD_DATABASE_URL="postgres://pad:secret@localhost:5432/pad" pad auth setup

# 5. Start the server with PostgreSQL
PAD_DB_DRIVER=postgres PAD_DATABASE_URL="postgres://pad:secret@localhost:5432/pad" pad server start

What gets migrated:

• Workspaces, collections, items, comments
• Item links (dependencies)
• Item versions (history)

What does NOT get migrated:

• User accounts and sessions (re-create with pad auth setup)
• Platform settings (reconfigure in admin panel)
• Activity/audit log (starts fresh)
• The collaborative edit log. Item bodies are migrated as they stand in the items table. Edits made in a browser tab that has not yet flushed them live only in the collaborative op-log, and that log does not travel — so the migration refuses to run while any item is in that state (see below).

Stop the server first — the migration enforces it

pad db migrate-to-pg refuses to run while a Pad server answers on the configured host and port:

the Pad server appears to be running at 127.0.0.1:7777 — stop it first
('pad server stop') so nothing can append collaborative edits while this
migration reads the database, or re-run with --force to override.

This is step 3 of the procedure above, enforced rather than merely documented. The reason is not the WAL (that is pad db restore's reason) but the op-log: a live server is the only thing that can append a collaborative edit, and the source read and the destination write live in two different databases, so no transaction can span them. With the server stopped, an edit cannot land mid-migration at all; with it running, no amount of re-checking makes the two atomic.

Like pad db restore's equivalent check, the probe asks whether something healthy answers on that host and port, not whether it is serving this particular database — so --force exists for the false positive. It also cannot see a second server on a different port against the same SQLite file. So the guarantee is "no reachable server at the configured address", not "nothing can possibly append"; under --force, or against a server the probe cannot see, the two checks below are what remain. If the config cannot be loaded at all the check is skipped and refuses unless --force is given, so a run that reaches the copy has either answered the question or been told to ignore it.

That gap — another process attached to the same database file that no address probe can see — is closed from the other end by the marker below (BUG-3072). The address probe stays as the cheap early refusal; neither door claims to be complete on its own.

The source database is marked when the migration succeeds

A successful pad db migrate-to-pg is the only command in Pad that ABANDONS its source: afterwards you point the server at PostgreSQL and the SQLite file stops being read. So when every workspace has been imported, and inside the same transaction the migration held over the whole run, it marks the SQLite file as migrated. From that moment:

• The file refuses to be opened by pad. pad server start and pad db nul against it fail with a message naming the PostgreSQL database the data went to.
• Any handle that is still open refuses writes, on any port, in any process, from any binary. This is the case that matters: a browser tab editing an item holds a connection that the migration's write lock only DEFERS — SQLite's busy_timeout belongs to the appender's connection, not to ours, so without the marker that edit would simply land a few seconds later, in the file you are about to abandon, and nothing would say so. With it, the write fails and the server logs the refusal.
• Reads still work. pad db backup does not go through the refusal (it opens its own connection and runs VACUUM INTO), and sqlite3, cp and any other tool are unaffected. The file is abandoned, not corrupt — take a copy before you delete it.

A migration that fails part-way does NOT mark the source: the transaction rolls back and the SQLite database is left exactly as it was, so you can fix the problem and re-run. The destination may be partially populated in that case — no transaction spans two databases — and the error says so; drop and recreate the PostgreSQL database before re-running.

Because the marker is permanent, a migration cannot be re-run against a file it has already migrated. That is deliberate: the second run would copy a database that has been frozen since the first.

Unflushed collaborative edits

pad db migrate-to-pg refuses if any item's stored body is behind its live collaborative document, and names the items:

2 item(s) have edits that exist only in the collaborative op-log,
which this migration does NOT carry. ...

  Beta (beta):
    TASK-7       half-typed body
    TASK-9       another one

Open each of those items in the web UI so the tab flushes its pending edits
into the database, then re-run this command. ...

The check covers every workspace before the first import runs, so a refusal always means nothing has been migrated.

A second check runs on each bundle after it is exported and before it is imported, because the pre-flight reads the database at one instant and the export reads it at another. If an edit lands in between — only possible under --force, since otherwise no server is running to make one — that workspace is refused too. That refusal does not claim nothing has been migrated: earlier workspaces in the run are already in PostgreSQL, and it says so with the count.

Opening the item in the web UI is the only remedy, and that is structural rather than an omission: Pad's collaboration server is a dumb relay that stores opaque Yjs updates without parsing them, so nothing server-side can turn those updates back into markdown — only a client can. This is also why the escape hatch is named for what it does to the data:

pad db migrate-to-pg --discard-unflushed-edits

That migrates anyway and permanently loses those edits, printing the same list as a warning so the loss is on the terminal record. Every other route is safer than this one and needs no flag: pad db backup / pad db restore copy the whole database (VACUUM INTO / pg_dump), op-log included, and the application-level export/import below leaves the source database in place, so a stale body there can be re-exported once a tab has flushed. The migration is the only operation that abandons its source.

Application-Level Export/Import

For portable workspace backups that work across SQLite and PostgreSQL:

# Export a workspace to JSON
pad workspace export > my-workspace.json

# Import into any Pad instance (SQLite or PostgreSQL).
# The file is an ARGUMENT, not stdin — `pad workspace import < file` fails
# with "accepts 1 arg(s), received 0".
pad workspace import my-workspace.json

# Import with a new name
pad workspace import --name "imported-workspace" my-workspace.json

Item reference numbers are preserved when the imported items have positive, workspace-unique numbers, including gaps left by deleted items. This keeps references such as [[TASK-2]] pointing to the same task after restoration or SQLite→PostgreSQL migration. Legacy archives with duplicate, missing, or invalid numbers retain the sequential-renumbering fallback; references in those archives may need manual repair.

Bodies that were stale when the bundle was written

An export is a snapshot of the items table, and a browser tab can hold edits that have not yet flushed into it. Such an item is exported with the body the table holds plus a marker:

{ "id": "...", "content": "the stored body", "content_state": "applied_pending_flush" }

The key is present only for affected items, so a bundle from a workspace with nothing pending is byte-identical to one produced before the marker existed, and older binaries ignore it (no bundle decoder rejects unknown keys). On import the count comes back as a response header:

X-Pad-Import-Stale-Bodies: 2

The import accepts those items — refusing would make a backup unrestorable for a reason nobody can fix from the destination — and the destination rows are NOT themselves marked, because nothing in the destination is ahead of them. The header is a provenance note: those bodies were already behind their source's live document when the bundle was cut. The source workspace still has the real text in its op-log, so re-exporting after a tab has flushed produces a clean bundle. The one case where that is not true is pad db migrate-to-pg, which is why that command refuses instead of warning.

One case where an export is not importable

A workspace whose stored data contains a NUL character exports fine and is refused on import, with a 400 naming the cause. This is not a corruption of your backup — it is the import applying a rule the write path now applies too (BUG-2803): Pad does not accept a NUL in a text or JSON value. That is an application rule, not a universal storage fact — PostgreSQL does refuse a NUL outright, but SQLite accepts one in a TEXT column, which is why the rule has to be enforced rather than assumed, and why the paragraphs below matter.

The rule is now enforced by the database as well as by the binary. It used to live only in the running build, which meant any window where an older binary served the same SQLite database could still create such rows — a rollback, a staged rollout, a second old instance pointed at the same file. A schema migration now installs triggers that refuse the write in the database itself, so an older binary writing to an upgraded file is refused too (BUG-2813). The window that remains is a SQLite database an upgraded binary has never opened: until its migrations run, it has no triggers.

Only SQLite ever needed this. PostgreSQL refuses a NUL in a text or JSON column itself, at every binary version, so a PostgreSQL instance never stored such a value regardless of which build wrote it.

None of that helps a row that was already stored, which is what the two commands below are for.

Finding and repairing affected rows

pad db scan-nul reports every stored value carrying a NUL, and every value that is not valid UTF-8 — which table and column, which row, and which workspace — and changes nothing. Invalid UTF-8 is not a NUL, but PostgreSQL refuses it too (SQLSTATE 22021 under a UTF8 database) and SQLite stores it silently, so it breaks a migration in the same way. Finding it means reading every stored value in full; on a 306 MB database that added about a second.

pad db scan-nul                       # the live database
pad db scan-nul --from /backups/pad-20260901.db   # or a backup file

pad db repair-nul rewrites those values, replacing each NUL and each invalid UTF-8 byte sequence with U+FFFD (the Unicode replacement character) and leaving the rest of the value byte for byte as it was. It changes stored content, which is why it is a separate command and never part of a migration — running a schema upgrade should not rewrite your text on your behalf. Run the scan first; it is the dry run. Running the repair twice is safe.

pad server stop
pad db repair-nul                     # lists what it will change, then asks
pad server start

A row whose primary key is the value carrying the NUL is reported and left alone: repairing it would change the row's identity and could collide with another row. email_optouts is the only table where that can happen today.

Migrating to PostgreSQL

pad db migrate-to-pg now runs the same scan as a preflight. If the source database carries any affected rows it lists them, prints the repair command, and exits without moving anything — rather than failing partway through the copy against PostgreSQL's JSONB parser, which is what it used to do.

A JSON value with LITERAL duplicate keys — {"a":"...","a":"..."} — used to hide anything in the shadowed copy, because Pad's checks decoded it the way the JSON decoder does and kept only the last. PostgreSQL refuses it all the same. Since BUG-2812 the checks read every occurrence, so such a row is an ordinary violation: listed by the scan and fixed by pad db repair-nul.

A value that merely mentions a NUL escape, such as a document that writes about the escape (a doubled backslash before it), is not a violation. PostgreSQL accepts it, the scan does not list it, and the preflight does not refuse on it. The scan judges the bytes as stored, so this holds for rows any earlier release of Pad wrote as well as for new ones.

Importing an export that predates the rule

If you have an export file taken from an affected database, the import still refuses it by default and the 400 names the remedy. Passing --repair-nul applies the same U+FFFD substitution to the payload as it is imported:

pad workspace import --repair-nul my-workspace.json

The default stays strict, and the flag is your consent to the rewrite; the command reports how many values it changed. It repairs the payload the way the server reads it, so it reaches a NUL wherever an export can carry one — including inside an item's fields blob, which travels through an export as a quoted document rather than as plain text.

Repairing the source database with pad db repair-nul and re-exporting gives the same result without a rewrite at import time, and is the better option when you still have the source instance.

This format is database-agnostic and can be used to:

• Transfer workspaces between Pad instances
• Create workspace templates
• Back up individual workspaces

Backup Strategy Recommendations

Small Teams (SQLite)

Daily: pad db backup --cron -o /backups/pad-$(date +%Y%m%d).db  (online-safe VACUUM INTO)
Weekly: Rotate old backups (keep 4 weeks)

Production (PostgreSQL)

Continuous: WAL archiving (point-in-time recovery)
Daily: pg_dump via 'pad db backup --cron'
Weekly: Full filesystem snapshot (if using managed DB)
Monthly: Test restore procedure

Disaster Recovery Checklist

• Backups are being created on schedule
• Backups are stored off-site (different region/provider)
• Restore procedure has been tested recently
• Recovery time objective (RTO) is documented
• Recovery point objective (RPO) is documented