restoreRecord had the restore POST and its zone refresh inside one catch. That
was harmless while refreshZone swallowed failures, but the previous commit made
it throw, which brought a new case into that catch: the restore succeeds and
only the publication fails.
The message then told the user the record "has been deleted" and to recreate it
by hand. It exists at OVH, just unpublished, so following that advice duplicates
it as soon as the zone is refreshed.
The two failures are now reported separately. A failed POST still means the
record is really gone and prints what to recreate. A failed refresh after a
successful restore says the record is back but not served yet, and explicitly
says not to recreate it. Either way the original replacement error is kept, so
the user still learns why the type change failed.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
refreshZone runs after the record write has already succeeded, so a failure
there means the change exists at the provider but is not being served yet. It
was left unguarded at all six call sites, so the caller saw a bare transport
error and would reasonably read it as "nothing was applied" — while a type
change had already deleted the old record and created its replacement.
Rolling the write back would destroy correct state over a publish failure, and
re-deleting after an uncertain network error is how records get lost. The error
now says what actually happened and how it resolves: the next successful change
to the zone publishes it, or the user can refresh the zone from the OVH manager.
Guarding the helper covers upsertRecord and deleteRecord too, not just the type
change Greptile pointed at.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
canary landed its own 0190 (0190_nappy_anita_blake), which collides with this
branch's 0190_even_mastermind. Renaming would not have been enough: drizzle
applies migrations by comparing timestamps against the last applied one, so this
branch's older `when` would have been silently skipped on any deployment that
had already run canary's 0190, leaving the enum without its new value.
Regenerated as 0191_elite_ultragirl with a current timestamp.
- Onboarding wizard (Welcome -> Plan -> Project -> Server -> Deploy ->
Complete), shown once to an org owner with zero projects and no active
plan/trial; skippable per step or entirely
- Billing page shows the org's current plan, and a no-card 14-day trial
card when eligible
- Post-checkout "Welcome to Dokploy Cloud" modal simplified to reuse the
onboarding wizard's own project/server/deploy steps behind a modal
instead of its previous standalone 6-step flow, using the app's regular
typography instead of the wizard's display serif
- Onboarding wizard validates a persisted project still exists before
resuming a stale session, and the dashboard layout no longer gets stuck
redirecting to /dashboard/home once the local onboarding-active flag
goes stale mid-session
- onboardingCompletedAt column on user, with a backfill so existing users
aren't shown the wizard
- pnpm reset-onboarding dev script to reset a test account's onboarding
state end to end
OVH matches access rules per exact path: a `GET /domain/zone/*` rule grants the
subtree but not the bare `GET /domain/zone` that listZones and testConnection
call. Verified against a live account with a consumer key carrying that single
wildcard rule:
GET /domain/zone -> 403 This call has not been granted
GET /domain/zone/ -> 200
GET /domain/zone/{zone}/record -> 200
The form only asked for rights on `/domain/zone/*`, so a token created by
following it could not list zones at all, and the failure surfaced as a bare
"This call has not been granted" that points nowhere.
The hint now lists the five rights verbatim, and a token missing the root one
gets an error that names it instead of echoing OVH's message.
Reported by @narcisonunez on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Changing a record's type deletes the record then recreates it with the new type,
because OVH's update payload carries no fieldType. If the creation failed the
name was left with nothing and no rollback.
The delete still has to come first, since OVH rejects a CNAME that would sit
alongside other data on the same name. So on a failed creation the original
record is put back from the copy already fetched before the delete, and the
original error is rethrown. If the restore fails too, the error names the record
that has to be recreated by hand.
Reported by Greptile on #5258.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds OVHcloud alongside Cloudflare, AWS Route53 and Porkbun, following the
existing DnsClient interface in packages/server/src/utils/dns/.
- ovh.ts implements listZones, listRecords, upsertRecord, updateRecord,
deleteRecord and testConnection against the /domain/zone endpoints of the
OVHcloud API, on any of its seven regional endpoints (ovh-eu/ca/us, kimsufi
and soyoustart).
- A new `ovh` value was added to the DnsProviderType enum along with an
ovhDnsConfigSchema (endpoint, applicationKey, applicationSecret, consumerKey)
in the discriminated union, plus the Drizzle migration for the enum change.
- The application secret and the consumer key are masked/merged like the other
providers' secrets in services/dns-provider.ts.
- UI: OVHcloud icon, an endpoint selector and the three credential fields in the
DNS provider dialog, plus registration in the provider selector.
Three OVH-specific behaviours are handled explicitly:
- Requests are signed with `$1$` + sha1(applicationSecret+consumerKey+method+
url+body+timestamp). The timestamp comes from the API's own clock via an
unauthenticated GET /auth/time, since a host clock a few seconds off would get
every call rejected; the measured drift is cached per endpoint for an hour.
- OVH only applies zone changes once the zone is explicitly refreshed, so every
successful create, update and delete is followed by POST /domain/zone/{zone}
/refresh.
- The record update payload carries no fieldType, so changing a record's type
replaces the record (DELETE then POST) and returns the new id.
The record listing endpoint returns ids only, so each record is fetched
individually with the fan-out capped at 8 concurrent requests.
Also fills in the missing Porkbun label in show-dns-providers.tsx, which fell
back to displaying the raw enum value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
findComposeById embedded the full github/gitlab/bitbucket/gitea
relations (client secrets, OAuth tokens, private keys, app passwords)
and compose.one only used canEditDeployGitSource to set a
hasGitProviderAccess flag, never to hide the fields — so any member
with read access to a compose service got the connected git
provider's raw credentials, regardless of their access to that
provider itself.
Exclude the same secret columns findApplicationById already excludes.
Deploys are unaffected: the actual clone step always re-fetches the
provider fresh by id (findGithubById/findGitlabById/...), it never
reads secrets off the embedded relation.
gitlab.one, github.one, gitea.one and bitbucket.one returned the full
DB record (OAuth access/refresh tokens, client secrets, private keys,
webhook secrets, app passwords) to any org member who merely had
access to *use* a shared provider (sharedWithOrganization: true),
not just its owner or an org owner/admin.
Add canViewGitProviderSecrets() and null out the secret fields in
each .one response when the caller isn't the provider owner or an
org owner/admin.
Show the services attached to a remote server directly in its delete
confirmation modal, with a link to each service and a per-service
delete action, instead of only showing a generic 'has active
services' blocker.
Embedding the full YAML (base64-encoded) into a single SSH exec command
silently fails once the payload passes the SSH transport's packet size
ceiling (~90-100KB), truncating the dynamic config with no error
surfaced anywhere. Switch to SFTP, which has no such limit.
--project-directory was added unconditionally in 87b914996 to fix
relative bind mount resolution for git-based compose deploys with a
nested composePath (#5181). It also moves where build.context and the
generated .env resolve, breaking any compose file in a subdirectory
that has context: . alongside its Dockerfile (#5230), or interpolates
env vars (#5242).
Only pin --project-directory when the compose actually has mounts
configured; otherwise build.context and .env resolve against the
compose file's own directory like plain docker compose. Also pass
--env-file explicitly pointing at the generated .env next to the
compose file, so it's found even when --project-directory is pinned
(credit: tonnenpinguin, PR #5235).
Fixes#5230Fixes#5242
Fixes#5152. updateFileMount wrote directly to the target path without
ensuring its parent directory existed, and silently swallowed errors
instead of surfacing them. If the path already existed as a directory
(e.g. Docker pre-creating a bind mount target), the write silently
failed and left an empty directory instead of the file.
Attaching Basic Auth or a Redirect to an application with no domains
wrote an empty routers/services block to the app's dynamic config
file. Traefik's file provider rejects that as invalid and aborts its
watcher, blocking config updates for every other application.
Fixes#5189
Compose deployments using a git provider (GitHub/GitLab/Gitea/Bitbucket/
custom Git) clone the repo verbatim, so composePath can point into a
subdirectory (e.g. deploy/docker-compose.yml). Docker Compose resolves
relative bind mounts (../files) against the compose file's own directory,
not against the code/ dir where file mounts are actually written, so the
mount silently binds an empty directory instead of the configured content.
Pin --project-directory to code/ when building the docker compose command
so relative mounts always resolve the same way raw deployments already do.
Fixes#5181
Network sync compared only by name, so a network deleted and
recreated with the same name but different attributes (driver,
attachable, etc.) was reported as already in sync.
Store Docker's network Id (dockerId column) and compare it against
the live Id during sync. A name match with a dockerId mismatch is
now surfaced as a new "changed" state, with an Update action to
refresh the DB row from the live network.
Fixes#5179
Escaping in prepareEnvironmentVariablesForFile escaped every $,
including inside a deliberate ${VAR} reference, breaking Compose's
documented .env variable interpolation. Only escape $ that isn't
part of a ${IDENTIFIER} sequence.
Fixes#5151
Adds Porkbun as a supported DNS provider alongside Cloudflare and
AWS Route53, allowing Dokploy to automatically create DNS records
for domains managed on Porkbun.
- New DnsClient implementation for the Porkbun API v3
- porkbun enum value and config schema (apiKey/secretApiKey)
- Drizzle migration for the new DnsProviderType enum value
- UI: provider icon, form fields and provider selector entry
- Unit tests covering listZones/listRecords/upsertRecord/updateRecord/deleteRecord/testConnection
Reaching a server implied being able to open an SSH root shell on it: the
/terminal websocket only checked that the server was in the caller's accessible
set, so granting a server to a developer necessarily granted root on it.
Add a server.terminal action, assignable on custom roles, and require it on the
remote-server terminal websocket on top of server access. Owner/admin keep it
through the enterprise bypass; the local host terminal stays owner/admin only.
A migration grants server.terminal to existing custom roles that already have
server.read, which is the permission that surfaces the terminal today, so
current setups keep working. Roles without a server entry are left alone.
Note: server.create still implies root execution (server.update persists
server.command and server.setup runs it over SSH), reflected in the Create
description in the role editor.
Route53 returns a record set as a list of values, but listing joined them
into one string and writing sent that string back as a single
ResourceRecord. Editing a multi-value NS, MX or TXT set therefore either
failed validation or collapsed the set into one bogus value, and creating
a record for a name that already had values replaced them silently.
Values are now newline separated end to end: listing joins with a
newline, writing splits back into one ResourceRecord per line, and
creating merges into the existing set instead of replacing it. Unquoted
TXT values get the quotes Route53 requires. The record panel shows a
textarea for Route53 and validates every line.
Cloudflare treats content as read-only for SRV and CAA and expects a
data object instead, so both types were rejected on write. The client
now parses the inline value into the fields Cloudflare wants, and
builds the payload before the lookup request so a malformed value
fails without spending an API call.
The form rejects a malformed SRV or CAA value up front and shows the
expected shape, so the error lands on the field instead of coming
back from the provider.
Guillaume Juge