mirror of
https://github.com/shankar0123/certctl.git
synced 2026-06-07 20:11:31 +00:00
1e1bc9b3b42085e8b9f178d05e9645fcc2e9e169
49 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 shankar0123
|
35e18bfc56 |
scheduler: bound renewal concurrency via CERTCTL_RENEWAL_CONCURRENCY
Closes the #9 acquisition-readiness blocker from the 2026-05-01 issuer coverage audit. Pre-fix, JobService.ProcessPendingJobs ran every claimed job sequentially in a single goroutine: safe but slow, and operators with large fleets had no lever to dial throughput up. Switching to fire-and-forget per-job goroutines would have unbounded the upstream-CA call rate and tripped DigiCert / Entrust / Sectigo rate limits — certctl's response to 429 was to retry on the next tick, re-fanning out the same calls and digging deeper into the limit. Operators need a knob. This commit: - Adds CERTCTL_RENEWAL_CONCURRENCY env var (default 25) loaded via the existing getEnvInt pattern in internal/config/config.go. Documented inline as the cap for the per-tick renewal/issuance/ deployment goroutine fan-out, with operator-tuning guidance: permissive upstream limits + large fleets (>10k certs) → 100; strict limits or async-CA-heavy fleets → 25 or lower. - Wires golang.org/x/sync/semaphore.Weighted around the per-job goroutine launch in JobService.ProcessPendingJobs. Acquire(ctx, 1) is the load-bearing piece — it BLOCKS the loop when at the cap, providing real backpressure rather than fire-and-forget. The fan-out is split into processPendingJobsSequential (legacy, preserved for unit-test wiring that doesn't call SetRenewalConcurrency) and processPendingJobsConcurrent (production, delegates to a generic boundedFanOut helper). - boundedFanOut takes the per-job work as a closure so the cap can be tested directly without standing up the renewal/deployment service graph. processed/failed counters use atomic.Int64 to avoid mutex overhead on every job completion; final log line reads both AFTER wg.Wait so the counts reflect every dispatched job. ctx-aware Acquire ensures a shutdown ctx cancel interrupts the dispatch loop promptly; in-flight goroutines drain via Wait before the function returns so no goroutine outlives the scheduler tick. - shouldSkipJob extracted as a package-private helper so the agent-routed-deployment skip logic is shared between the sequential and concurrent paths byte-for-byte (the audit prompt's "channel-based semaphore without ctx-aware acquire" anti-pattern is explicitly avoided — semaphore.Weighted.Acquire returns on ctx done; channel <- struct{}{} would block forever). - SetRenewalConcurrency setter on JobService normalises ≤0 to 1. semaphore.NewWeighted(0) constructs a semaphore that blocks every Acquire forever; the normalisation prevents a misconfigured env var from wedging the scheduler. - cmd/server/main.go wires SetRenewalConcurrency(cfg.Scheduler. RenewalConcurrency) on the freshly-built jobService, immediately after SetAuditService. Production deployments always take the bounded path; tests that build JobService directly via NewJobService keep their strict-sequential behaviour because renewalConcurrency is the zero value. - Tests in internal/service/job_concurrency_test.go: * TestBoundedFanOut_CapHolds — primary regression guard. 50 jobs × 50ms work × cap=5 → asserts peak in-flight never exceeds 5 AND reaches 5 at least once (catches both upper-bound regressions and gates that incorrectly cap below the configured value). Lock-free max via CompareAndSwap so the measurement instrument doesn't itself constrain concurrency. * TestBoundedFanOut_AllJobsRun — lower-bound: every non-skipped job is dispatched. * TestBoundedFanOut_SkipsAgentRoutedDeployments — pins the shouldSkipJob contract. * TestBoundedFanOut_CtxCancelInterrupts — ctx cancellation interrupts a stuck fan-out within the timeout budget. * TestBoundedFanOut_FailedJobsCounted — per-job errors don't abort the fan-out. * TestSetRenewalConcurrency_NormalizesNonPositive — ≤0 → 1 fail-safe pinned across negative/zero/positive inputs. - docs/features.md: scheduler-loop table augmented with the concurrency-cap env-var pointer alongside the job-processor row. - docs/architecture.md: Concurrency Safety section gains a paragraph explaining the cap, the operator-tuning guidance, the ctx-aware Acquire semantics, and the audit reference. Operator-facing impact: the first big renewal sweep no longer takes down the upstream CA's rate-limit budget. Existing deployments get the bounded path automatically (default 25); operators can override via env var without code changes. Verified locally: - gofmt -l . clean - go vet ./... clean - staticcheck ./... clean - go test -short -count=1 across service / scheduler / config / integration: green - Six new tests under TestBoundedFanOut* + TestSetRenewalConcurrency*: green Audit reference: cowork/issuer-coverage-audit-2026-05-01/RESULTS.md Top-10 fix #9. |
||
|
shankar0123
|
b95a548f65 |
docs: deploy-hardening I — atomic deploy + post-verify operator guide + connectors / README updates
Phase 12 of the deploy-hardening I master bundle. NEW docs/deployment-atomicity.md (12 sections, ~280 lines): 1. Overview — the three procurement-checklist gaps closed 2. The atomic-write primitive (Plan / File / Apply algorithm) 3. Per-connector atomic contract table (all 13 connectors) 4. Post-deploy TLS verification (handshake + SHA-256 + retries) 5. Rollback semantics (3 triggers + escalation path) 6. ValidateOnly dry-run mode (per-connector matrix) 7. File ownership + mode preservation (precedence + per-distro defaults) 8. Per-target deploy mutex (Phase 2) 9. Idempotency via SHA-256 (defends against retry storms) 10. Troubleshooting matrix (one row per failure mode) 11. V3-Pro deferrals (multi-region, pin manifests, SOC 2 export) 12. Per-connector quick reference (paste-able config snippets) UPDATE README.md::Deployment Targets — every connector row now notes the atomic + verify + rollback semantics that landed in deploy-hardening I. Added a closing paragraph linking to the new docs/deployment-atomicity.md. UPDATE docs/features.md — two new env-var rows: - CERTCTL_DEPLOY_BACKUP_RETENTION (default 3, -1 disables) - CERTCTL_K8S_DEPLOY_KUBELET_SYNC_TIMEOUT (default 60s) The G-3 docs-drift CI guard is satisfied: every new CERTCTL_DEPLOY_* env var documented here also appears in source (internal/deploy/types.go for BACKUP_RETENTION, k8ssecret config for KUBELET_SYNC_TIMEOUT). S-1 stale-counts guard: no literal-number current-state counts in the new doc — the per-connector tests are referenced via the file:line pattern (internal/connector/target/<name>/<name>_atomic_test.go) so the operator can grep for the actual count. Phase 13 next: pre-commit verification (full matrix + CI guard reproductions). |
||
|
shankar0123
|
faf580aa10 |
docs: production hardening II — DR runbook + crl-ocsp updates + features.md env vars (Phase 10)
Production hardening II Phase 10 — operator-facing documentation
that codifies the new V2 surfaces shipped in Phases 1-8.
NEW docs/disaster-recovery.md (8 sections, ~280 lines):
- Overview of automatic fail-safes already in code
- CRL cache recovery (delete row + scheduler regenerates)
- OCSP responder cert recovery (delete row + ensureOCSPResponder
re-bootstraps on next request)
- OCSP response cache recovery (delete row + read-through fallback)
- CA private-key rotation procedure (9-step playbook)
- Postgres restore (with explicit list of operator-managed
artifacts NOT in DB)
- Trust-bundle reload semantics (SCEP / EST / Intune SIGHUP-
equivalent fail-safe behavior)
- DR checklist (printable; pin near on-call)
This is the SOC 2 / PCI procurement-team deliverable. Auditors and
on-call operators get a single document that tells them what to do
when state corrupts, when keys need rotation, when Postgres needs
restoring. Nothing in the runbook requires new code — it codifies
behaviors already in the codebase.
UPDATED docs/crl-ocsp.md:
- New "Production hardening II additions" section: OCSP nonce
extension, OCSP pre-signed cache (with the load-bearing security
wire called out), per-source-IP OCSP rate limit, per-actor cert-
export rate limit, CRL HTTP caching headers (RFC 7232), CRL
DistributionPoints auto-injection, cert-export typed audit
codes, per-area Prometheus metrics with operator alert
recommendations.
- Pruned the V3-Pro deferral list to remove items that this
bundle SHIPPED (OCSP rate-limiting moved out; remaining V3-Pro:
delta CRLs, OCSP stapling, OCSP request signature verification,
HA / multi-region replication, IDP extension for sharded CRLs).
UPDATED docs/features.md:
- CERTCTL_OCSP_RATE_LIMIT_PER_IP_MIN row (default 1000)
- CERTCTL_CERT_EXPORT_RATE_LIMIT_PER_ACTOR_HR row (default 50)
G-3 docs-drift CI guard reproduced clean: every new CERTCTL_* env
var documented in features.md AND consumed in Go source. S-1 stale-
counts guard clean (no literal-number prose for current-state
counts in README/docs).
|
||
|
shankar0123
|
8cc1153bd9 |
fix(docs/est): drop CERTCTL_EST_* wildcard prose to satisfy G-3 docs-drift guard
The previous commit (
|
||
|
shankar0123
|
827b9cb6c8 |
docs(est): document CERTCTL_EST_PROFILES + per-profile env-var family (G-3 fix)
The Phase 1 commit (
|
||
|
shankar0123
|
7612da783a |
feat(scep-intune): per-profile dispatcher + SIGHUP reload + per-device rate limit + compliance hook seam
Phase 8 of the SCEP RFC 8894 + Intune master bundle. Wires the internal/scep/intune validator from Phase 7 into the SCEPService dispatch path, with a SIGHUP-reloadable trust anchor holder, a per-(Subject, Issuer) sliding-window rate limiter, and a nil-default ComplianceCheck seam for V3-Pro. Operator-visible surface (per-profile, all default to off): CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_ENABLED=true CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_CONNECTOR_CERT_PATH=/etc/certctl/intune.pem CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_AUDIENCE=https://certctl.example.com/scep/corp CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_CHALLENGE_VALIDITY=60m CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_PER_DEVICE_RATE_LIMIT_24H=3 Per-profile dispatch (Phase 8.8): an operator running corp-laptops through Intune AND IoT devices through static challenge configures INTUNE_ENABLED=true on the corp profile only — the IoT profile's PKCSReq path skips the dispatcher entirely. Mirrors the per-profile shape established by Phase 1.5. Wire-in surfaces: * config.go (Phase 8.1): SCEPProfileConfig.Intune sub-config of type SCEPIntuneProfileConfig (Enabled/ConnectorCertPath/Audience/ ChallengeValidity/PerDeviceRateLimit24h). Loaded from the indexed CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_* env-var family. Per-profile Validate gate refuses INTUNE_ENABLED=true with empty ConnectorCertPath OR negative PerDeviceRateLimit24h. * cmd/server/main.go (Phase 8.2 + wire-in): preflightSCEPIntuneTrustAnchor helper mirrors preflightSCEPRACertKey/preflightSCEPMTLSTrustBundle shape — fail-loud at boot when the trust anchor file is missing / unreadable / empty / contains an expired cert. The per-profile loop builds the holder + replay cache + rate limiter, calls SetIntuneIntegration on the SCEPService, and starts the SIGHUP watcher. A deferred sweep stops every watcher at shutdown. * internal/scep/intune/trust_anchor_holder.go (Phase 8.5): TrustAnchorHolder mirrors cmd/server/tls.go::certHolder. RWMutex- guarded pool + Reload that swaps a fresh slice on success + WatchSIGHUP goroutine that responds to the same SIGHUP the existing TLS-cert watcher uses. A bad reload (parse error, expired cert) keeps the OLD pool in place so a half-rotation doesn't take Intune enrollment down — same fail-safe pattern. Operators rotate via the on-disk file then 'kill -HUP <certctl-pid>'. * internal/scep/intune/rate_limit.go (Phase 8.6): hand-rolled sliding-window-log limiter keyed by (Subject, Issuer). 100k-entry map cap (matches replay cache); at-cap drops the bucket whose newest timestamp is the oldest. Default 3 enrollments per 24h covers legitimate first-cert + recovery + post-wipe re-enrollment but blocks bulk enumeration from a compromised Connector signing key. maxN <= 0 disables the limiter for tests + the rare operator who wants no per-device cap. Empty subject short-circuits to allow (defense-in-depth: caller's claim validation rejects empty-subject upstream; no shared bucket on ''). Why hand-rolled instead of golang.org/x/time/rate: the rate package is in go.sum as an indirect transitive but not a direct dep. ~30 LoC of stdlib avoids creating a new direct dep. * internal/service/scep.go (Phase 8.3 + 8.4 + 8.7): - SCEPService gains intuneEnabled / intuneTrust / intuneAudience / intuneValidity / intuneReplayCache / intuneRateLimiter / complianceCheck fields. - SetIntuneIntegration() constructor-time injection wires the per-profile state. Profiles with INTUNE_ENABLED=false never call this method, so they pay zero overhead. - SetComplianceCheck() installs the V3-Pro plug-in (see Phase 8.7). - looksIntuneShaped(): JWT-shape pre-check (length > 200 + exactly two dots). Allowed to false-positive (validator catches malformed → ErrChallengeMalformed); MUST NOT false-negative on real Intune challenges. - dispatchIntuneChallenge(): the load-bearing core. Runs ValidateChallenge → CSR-binding via DeviceMatchesCSR → replay cache CheckAndInsert → per-device Allow → optional ComplianceCheck. Each failure leg increments a typed metric label and emits an audit-friendly Warn log line. - PKCSReq + PKCSReqWithEnvelope + RenewalReqWithEnvelope all call dispatchIntuneChallenge first; on outcome.decided=true they either short-circuit (with a typed-error → SCEPFailInfo mapping) or call processEnrollment with action='scep_pkcsreq_intune' (so audit greps can count Intune-vs-static enrollments). - mapIntuneErrorToFailInfo(): typed-error → SCEPFailInfo per RFC 8894 §3.2.1.4.5 (signature/replay/expired → BadMessageCheck; claim-mismatch → BadRequest; default → BadRequest). - intuneFailReason(): typed-error → metric label ('signature_invalid' / 'expired' / 'rate_limited' / etc.). Default 'malformed' so a previously-unseen error category still surfaces in the metric for follow-up. - ComplianceCheck (Phase 8.7): nil-default no-op gate. V3-Pro plugs in via SetComplianceCheck to call Microsoft Graph's compliance API. Returns (compliant, reason, err). nil-err + compliant=false → CertRep FAILURE + 'compliance' reason in audit. err != nil → fail-safe deny (V3-Pro module is responsible for any 'permit on API failure' policy). * internal/service/scep.go also gains parseCSRForIntune() — small private wrapper around encoding/pem + x509 used by the dispatcher for the claim ↔ CSR binding check (separated from the broader processEnrollment because we want to bind BEFORE consuming the replay-cache slot). Tests (gates: ≥85% coverage on intune package, ≥70% on service): * scep_intune_test.go (in internal/service): 14 dispatcher tests covering happy-path Intune enrollment + static-challenge fallback + tampered-challenge reject + claim-mismatch reject + replay detected + rate-limited + compliance-hook nil-default + compliance- hook denies non-compliant + compliance-hook error fails closed + IntuneEnabled accessor + 'no IntuneEnabled = static path unchanged' regression pin + intuneFailReason mapping for every typed error + looksIntuneShaped boundary cases. * trust_anchor_holder_test.go (in internal/scep/intune): NewLoadsBundle, NewRequiresLogger, NewSurfacesLoadError, ReloadHappyPath, ReloadKeepsOldOnFailure, ReloadKeepsOldOnExpired (the fail-safe semantics that make the SIGHUP path operator-friendly), WatchSIGHUPReloadsPool (real SIGHUP to self with poll-for-swap pattern mirroring cmd/server/tls_test.go), WatchSIGHUPStopIsClean (does NOT fire SIGHUP after stop — same caveat as the TLS test: the Go runtime would otherwise terminate the test runner on the next SIGHUP since signal.Stop has removed the handler). * rate_limit_test.go (in internal/scep/intune): AllowsUpToCap, DistinctKeysIndependent, WindowExpiry, DisabledBypass (maxN=0), NegativeCapDisabled, EmptySubjectShortCircuits (defense-in-depth against an empty-subject DoS chokepoint), DefaultCapsHonored, MapCapEvictsOldest (at-cap eviction branch), ConcurrentRaceFree (50 goroutines × 200 inserts), pruneOlderThan + the no-op case. Verification: * gofmt -l on all touched files: clean * go vet ./... : clean * staticcheck on intune/service/config/cmd-server: clean * go test -count=1 -cover ./internal/scep/intune/...: 94.8% (target ≥85%) * go test -short across intune+service+config+handler+cmd-server: all green * G-3 docs-drift CI guard reproduced locally: docs-only filtered= empty, config-only=empty. The new env vars match the existing CERTCTL_SCEP_ allowlist prefix. Refs: cowork/scep-rfc8894-intune-master-prompt.md::Phase 8 cowork/scep-rfc8894-intune/progress.md Constitutional rule: 'Always take the complete path, not the easy path' (cowork/CLAUDE.md::Operating Rules) — operator can flip CERTCTL_SCEP_PROFILE_<NAME>_INTUNE_ENABLED=true and observe the dispatcher pick up Intune-shaped challenges end-to-end with no further code changes. Foundation + plumbing ship together. |
||
|
shankar0123
|
a12a437664 |
feat(scep): mTLS sibling route /scep-mtls/<pathID> (opt-in)
SCEP RFC 8894 + Intune master bundle — Phase 6.5 of 14 (opt-in,
enterprise-procurement-checkbox).
Closes the procurement-team objection that 'shared password
authentication' is a checkbox-fail regardless of how strong the
password is. The clean answer: a sibling route that adds client-cert
auth at the handler layer AND keeps the challenge password (defense in
depth, not replacement). Devices present a bootstrap cert from a
trusted CA (e.g. a manufacturing-time cert), then SCEP-enroll for
their long-lived cert. Same model Apple's MDM and Cisco's BRSKI use.
internal/config/config.go
* SCEPProfileConfig gains MTLSEnabled bool + MTLSClientCATrustBundlePath
string. Indexed env-var loader reads
CERTCTL_SCEP_PROFILE_<NAME>_MTLS_ENABLED +
CERTCTL_SCEP_PROFILE_<NAME>_MTLS_CLIENT_CA_TRUST_BUNDLE_PATH.
* Validate() refuses MTLSEnabled=true with empty bundle path —
structural defense in depth ahead of the file-content preflight.
cmd/server/main.go
* preflightSCEPMTLSTrustBundle: file existence + PEM parse + ≥1
CERTIFICATE block + non-expired check. Returns the parsed
*x509.CertPool ready to inject into the per-profile SCEPHandler.
Failures os.Exit(1) with the offending PathID in the structured log.
* SCEP startup loop walks each profile; when MTLSEnabled, runs
preflight, builds the per-profile pool, contributes the bundle's
certs to the union pool that backs the TLS-layer
VerifyClientCertIfGiven, clones the SCEPHandler with
SetMTLSTrustPool, and registers the parallel sibling route via
apiRouter.RegisterSCEPMTLSHandlers.
* Union pool published to outer scope as scepMTLSUnionPoolForTLS;
passed to buildServerTLSConfigWithMTLS so the listener serves both
/scep[/<pathID>] (no client cert) and /scep-mtls/<pathID>
(cert required at handler layer) on the same socket.
* Final-handler dispatch gains /scep-mtls + /scep-mtls/* prefix
routing through the no-auth chain (auth boundary is the client
cert + challenge password, NOT a Bearer token).
cmd/server/tls.go
* New buildServerTLSConfigWithMTLS that wraps buildServerTLSConfig
+ sets ClientCAs + ClientAuth=VerifyClientCertIfGiven when a
non-nil pool is passed. nil pool = identical TLS shape to the
pre-Phase-6.5 builder (no behavior change for deploys without
mTLS profiles).
* Critical: VerifyClientCertIfGiven (NOT RequireAndVerifyClientCert)
so a client that doesn't present a cert can still hit the standard
/scep route. The per-profile gate at the handler layer enforces
'cert required' on /scep-mtls/<pathID>.
internal/api/handler/scep.go
* SCEPHandler gains mtlsTrustPool *x509.CertPool field +
SetMTLSTrustPool method. Per-profile pool injected by
cmd/server/main.go after preflight.
* HandleSCEPMTLS wrapper: gates on r.TLS.PeerCertificates non-empty
+ per-profile cert.Verify against THIS profile's pool. Returns
HTTP 401 for missing/untrusted cert (mTLS failure is auth, not
authorization). Returns HTTP 500 if mtlsTrustPool is nil (deploy
bug — the route shouldn't have been registered). On success
delegates to HandleSCEP — defense in depth: mTLS is additive,
NOT replacement; the standard SCEP code path including the
challenge-password gate still executes.
* Per-profile re-verification via cert.Verify(...) is critical:
the TLS layer verified against the UNION pool, so a cert that
chains to profile A's bundle would pass TLS even when targeting
profile B. The handler-layer gate prevents cross-profile
bleed-through.
internal/api/router/router.go
* AuthExemptDispatchPrefixes gains '/scep-mtls' (auth boundary is
client cert + challenge password, NOT Bearer token).
* RegisterSCEPMTLSHandlers parallel to RegisterSCEPHandlers:
empty PathID maps to /scep-mtls root; non-empty maps to
/scep-mtls/<pathID>. Each handler in the map MUST have had
SetMTLSTrustPool called.
internal/api/router/openapi_parity_test.go
* SpecParityExceptions allowlists 'GET /scep-mtls' + 'POST
/scep-mtls' since the wire format is identical to /scep —
documenting both routes separately would duplicate every
operation row with no information gain. Documented alternative
in docs/legacy-est-scep.md.
internal/api/handler/scep_mtls_test.go (new, ~210 LoC)
* 6 tests + 2 helpers covering the auth contract:
1. RejectsMissingClientCert — request with r.TLS=nil → 401
2. RejectsUntrustedClientCert — cert chains to a different
CA → 401 (per-profile re-verification works)
3. AcceptsTrustedClientCert — cert chains to THIS profile's
pool → 200 (delegates to HandleSCEP)
4. StillRoutesThroughHandleSCEP — pin Content-Type + body
come from HandleSCEP delegate (defense in depth pin)
5. NoTrustPool_Returns500 — handler with SetMTLSTrustPool
never called → 500 (deploy-bug surface)
6. StandardRoute_StillNoMTLS — pin /scep keeps working
without a client cert even when mTLS pool is set
* genSelfSignedECDSACA + signECDSAClientCert helpers materialise
real cert chains (trusted-bootstrap-ca + trusted-device,
untrusted-attacker-ca + untrusted-device) so the Verify path
exercises real x509 chain validation, not mocks.
docs/features.md
* SCEP env-vars table extended with the two new MTLS env vars
(CERTCTL_SCEP_PROFILE_<NAME>_MTLS_ENABLED,
CERTCTL_SCEP_PROFILE_<NAME>_MTLS_CLIENT_CA_TRUST_BUNDLE_PATH).
Closes the G-3 'env var defined in Go but never documented' gate.
docs/legacy-est-scep.md
* New 'mTLS sibling route (Phase 6.5, opt-in)' section covering
opt-in env vars, TLS server config (union pool +
VerifyClientCertIfGiven), handler-layer per-profile gate,
full auth chain on /scep-mtls/<pathID>, operator migration
workflow from challenge-password-only to challenge+mTLS.
cowork/CLAUDE.md::Active Focus
* 'HALF 1 COMPLETE' updated from '(Phases 0-5 of 14 SHIPPED)' to
'(Phases 0-6 + Phase 6.5 of 14 SHIPPED)'.
Verification:
* gofmt + go vet + staticcheck clean across api/handler /
api/router / config / cmd/server.
* go test -short -count=1 green across api/handler (with the new
scep_mtls_test.go) / api/router / service / config / pkcs7 /
cmd/server / connector/issuer/local.
* G-3 docs-drift CI guard local check: empty in both directions
after the new MTLS env vars landed in features.md.
* The constitutional test ('can an operator flip the bit and
observe the behavior change end-to-end?') is YES: setting
CERTCTL_SCEP_PROFILE_<NAME>_MTLS_ENABLED=true plus the trust
bundle path produces a working /scep-mtls/<pathID> endpoint
that accepts trusted client certs + rejects untrusted ones,
with no further code changes required.
Phase 6.5 of 14 in SCEP RFC 8894 + Intune master bundle.
Half 1 (Phases 0-6 + 6.5) is now FEATURE-COMPLETE for the
ChromeOS / general-MDM use case. Half 2 (Phases 7-12) adds the
Microsoft Intune dynamic-challenge layer.
|
||
|
shankar0123
|
5c7c125d9d |
ci+docs(scep): close G-3 docs-only drift for SCEP placeholder + wildcard
Commit
|
||
|
shankar0123
|
294f6cff52 |
docs(scep): document multi-profile env vars (CERTCTL_SCEP_PROFILES + per-profile prefix)
Phase 1.5 added two new env-var literals to internal/config/config.go
that the G-3 docs-drift CI guard picked up but I forgot to document
when shipping commit
|
||
|
shankar0123
|
105c307d62 |
feat(scep): add RFC 8894 message-type constants + RA cert/key config
SCEP RFC 8894 + Intune master bundle — Phase 0 + Phase 1 of 14.
Phase 0 (recon, no code changes):
Baseline tests green at HEAD
|
||
|
shankar0123
|
2519da85f0 |
docs: README + concepts + features reflect CRL/OCSP responder bundle
Audit pass against cowork/crl-ocsp-responder-prompt.md found three
operator-facing docs still describing the pre-bundle CRL/OCSP surface
(GET-only OCSP, CA-key-direct signing, no scheduler-driven cache). Each
claim updated below was ground-truthed against repo HEAD before edit.
README.md
* Standards & Revocation table — CRL row now mentions
scheduler-pre-generated cache (CERTCTL_CRL_GENERATION_INTERVAL,
crl_cache table); OCSP row mentions GET + POST forms, dedicated
responder cert per RFC 6960 §2.6, id-pkix-ocsp-nocheck per
§4.2.2.2.1, 7d auto-rotation grace.
* Revocation paragraph — corrected the 'Embedded OCSP responder'
one-liner to call out the dedicated-responder-cert design (the CA
private key is never used directly for OCSP signing, which is the
load-bearing security property for the future PKCS#11/HSM driver
path) and added the link to the relying-party guide.
docs/concepts.md
* CRL paragraph — added the scheduler pre-generation + singleflight
coalescing detail. Kept the existing 24h validity claim (verified
against internal/connector/issuer/local/local.go:956 — 'NextUpdate:
now.Add(24 * time.Hour)').
* OCSP paragraph — corrected the description so it covers both GET
and POST forms (POST per RFC 6960 §A.1.1 is what production
clients use: Firefox, OpenSSL s_client -status, cert-manager,
Intune); added the dedicated-responder-cert + nocheck-extension +
auto-rotation explanation; cross-link to docs/crl-ocsp.md.
docs/features.md
* Revocation Infrastructure section — CRL Endpoint, OCSP Responder,
new Admin Cache Observability subsection, new GUI Revocation
Endpoints Panel subsection. Corrected the previously-wrong 'Signs
with the issuing CA key' OCSP claim — the bundle's load-bearing
security improvement is exactly that the CA key is NOT used
directly. Cross-link to crl-ocsp.md.
* Local CA env vars table — added all four new
CERTCTL_CRL_GENERATION_INTERVAL / CERTCTL_OCSP_RESPONDER_KEY_DIR
(with the prod 'MUST set' callout) / _ROTATION_GRACE / _VALIDITY
rows. Closes the G-3 'env var defined in Go but never documented'
drift that broke CI on commit
|
||
|
shankar0123
|
a172b6ed3b |
Bundle B CI follow-up: G-3 env-var docs + M-028 closure (final 5 SA1019 sites)
Two CI failures on master after Bundle B merge:
1. Frontend Build / G-3 env-var docs guardrail
Bundle B introduced CERTCTL_RATE_LIMIT_PER_USER_RPS and
CERTCTL_RATE_LIMIT_PER_USER_BURST without adding them to
docs/features.md. The guardrail step that scans Go source for
getEnv* calls and asserts each appears in a doc page failed.
Fix: docs/features.md rate-limit section extended with both new
env vars + a paragraph explaining the per-key keying contract
from M-025.
2. Go Build & Test / staticcheck SA1019 hits (6 errors)
The CI workflow runs staticcheck without continue-on-error. Bundle
7 opened M-028 to track 6 deprecated-API sites; Bundle 9 closed 1
of them (the elliptic.Marshal in local.go) but kept a deliberate
regression-oracle reference in bundle9_coverage_test.go protected
only by golangci-lint's //nolint comment — staticcheck-as-CLI does
not honor that, only its native //lint:ignore directive.
Closure of remaining 5 sites:
cmd/server/main_test.go:47, 163, 192, 465 — 4 × middleware.NewAuth
migrated to middleware.NewAuthWithNamedKeys with explicit
NamedAPIKey entries. The auth=none case at line 465 maps to a
nil NamedAPIKey slice (no-op pass-through, matches the
NewAuthWithNamedKeys contract for empty input). Audit count was
3; recon found a 4th at line 465 that was missed.
internal/api/handler/scep.go:266 — csr.Attributes is a real RFC
2985 §5.4.1 challengePassword carve-out. Go's stdlib deprecation
note explicitly applies only to OID 1.2.840.113549.1.9.14
(requestedExtensions), NOT to OID 1.2.840.113549.1.9.7
(challengePassword), for which there is no non-deprecated
stdlib API. Suppressed with native //lint:ignore SA1019 +
comment block citing the RFC.
internal/connector/issuer/local/bundle9_coverage_test.go:342 —
deliberate regression-oracle that calls elliptic.Marshal to
prove the new crypto/ecdh path is byte-identical. Comment
converted from //nolint:staticcheck to native //lint:ignore
SA1019 so staticcheck-as-CLI honors the suppression.
Audit deliverables:
cowork/comprehensive-audit-2026-04-25/audit-report.md: M-028 box
flipped [x]; score 30/55 -> 31/55 (Medium 12/27 -> 13/27).
cowork/comprehensive-audit-2026-04-25/findings.yaml: M-028 status
partial_closed -> closed with closure note.
Verification:
go test -count=1 -short ./cmd/server ./internal/api/handler
./internal/connector/issuer/local ./internal/api/middleware
./internal/config — all green.
staticcheck on each changed package — 0 SA1019 hits.
Bundle C had M-028 in scope; this CI-fix lift moves it forward so
master CI goes green immediately. Bundle C scope adjusts to remove
M-028 and focuses on M-006 / M-015 / M-016 / M-019 / M-020 plus the
M-007 / M-008 coverage gaps.
|
||
|
shankar0123
|
45ba27693b | Update LICENSE metadata | ||
|
shankar0123
|
a2a82a6cf8 |
fix(bundle-5): CI green-up — drop unused sync.Once + document new env vars
Two CI gate failures from the Bundle 5 push:
1. golangci-lint (unused) — agent_bootstrap.go declared
`var bootstrapWarnOnce sync.Once` but never called .Do(). The
one-shot WARN actually lives in cmd/server/main.go (per-process at
startup, not per-request) so the handler-side variable was dead code.
Dropped the var + sync import; left a comment explaining where the
WARN lives.
2. G-3 env-var docs guardrail — Bundle 5 added two new env vars
(CERTCTL_AGENT_BOOTSTRAP_TOKEN, CERTCTL_AUDIT_FLUSH_TIMEOUT_SECONDS)
but the G-3 closure CI step asserts every CERTCTL_* env defined in
internal/config/config.go is mentioned in docs/features.md. Added
three new sub-sections to docs/features.md after the Body Size
Limits block:
* Agent Bootstrap Token (H-007 contract + generation guidance)
* Graceful Shutdown Audit Flush (M-011 timeout knob)
* Liveness vs Readiness Probes (H-006 /health vs /ready table)
No production behaviour change; pure CI-gate fix.
Verification
- go vet ./internal/api/handler/... → clean
- go test -count=1 -run 'TestVerifyBootstrapToken|TestRegisterAgent_BootstrapToken' ./internal/api/handler/... → all pass
- grep CERTCTL_AGENT_BOOTSTRAP_TOKEN docs/features.md → present
- grep CERTCTL_AUDIT_FLUSH_TIMEOUT_SECONDS docs/features.md → present
|
||
|
shankar0123
|
c6a9a76147 |
docs(features): document CERTCTL_SHORT_LIVED_EXPIRY_CHECK_INTERVAL (G-3 fix)
CI on the S-2 merge ( |
||
|
shankar0123
|
1c6009a920 |
chore(cleanup,docs): vite proxy + dead scheduler setter wired + registerAgent/CLI docs (C-1 master)
Closes six 2026-04-24 audit findings (3 P2 + 3 P3) — a cleanup-and-doc
tail bundle that drains the smallest remaining leaves of the audit:
- cat-u-vite_dev_proxy_plaintext_drift (P2): web/vite.config.ts
proxied dev requests to http://localhost:8443 against an HTTPS-only
backend (HTTPS-only since v2.0.47). Every dev-server API call 502'd.
Fix: targets are now object-form `{target: 'https://...', secure: false,
changeOrigin: true}` — the dev cert is self-signed by the
deploy/test bootstrap and changes per-checkout.
- cat-g-7e38f9708e20 (P3): Scheduler.SetShortLivedExpiryCheckInterval
was defined + tested but never called from cmd/server/main.go.
Operators tuning CERTCTL_SHORT_LIVED_EXPIRY_CHECK_INTERVAL got
no effect — the 30s default in scheduler.NewScheduler was
effectively hardcoded. Fix: added Config.Scheduler.ShortLivedExpiryCheckInterval
+ getEnvDuration in Load() reading the env var with a 30s default,
+ sched.SetShortLivedExpiryCheckInterval(...) call in main.go
alongside the other scheduler-interval setters.
- diff-10xmain-2bf4a0a60388 (P3): same root cause as cat-g-7e38f9708e20;
closes as ride-along.
- cat-b-6177f36636fb (P2): registerAgent client fn orphan. By-design
per pull-only deployment model. Fix (audit recommendation:
"document"): added a closure docblock above the export in
client.ts + a new "Registration is by-design pull-only" paragraph
in docs/architecture.md::Agents section explaining when/why a
future GUI-driven enrollment feature might reach the endpoint
(proxy-agent topologies for network appliances).
- cat-i-7c8b28936e3d (P2): CLI scope intentionally narrow but
undocumented. Fix: new "Scope (intentionally narrow)" subsection
in docs/features.md::CLI capturing the SSH-into-prod / day-to-day
GUI / AI-automation MCP three-way split.
Verification:
- go build ./... — clean
- go vet ./... — clean
- go test ./internal/scheduler/... ./internal/config/... — pass
- golangci-lint v2.11.4 run ./... — 0 issues
- tsc --noEmit (frontend) — clean
- All sibling guardrails (S-1 / G-3 / D-1+D-2 / B-1 / L-1 / H-1) still pass
Audit findings closed:
- cat-u-vite_dev_proxy_plaintext_drift (P2)
- cat-g-7e38f9708e20 (P3)
- diff-10xmain-2bf4a0a60388 (P3)
- cat-b-6177f36636fb (P2)
- cat-i-7c8b28936e3d (P2)
- (audit-bookkeeping ride-along: ensures every closed-bundle row has a non-empty merge SHA)
Deferred follow-ups: none from this bundle. The remaining audit
backlog (frontend test campaign, F-1 CertificatesPage UX, P-1
orphan-fn sweep, S-2 handler error-mapping refactor) is sibling
sub-bundles in this mega-prompt.
|
||
|
shankar0123
|
2419f8cd27 |
docs(features): reconcile env-var inventory with config.go (G-3 master)
Closes three 2026-04-24 audit findings (all P2, all category cat-g):
- cat-g-renewal_check_interval_rename_drift: features.md:152
advertised CERTCTL_RENEWAL_CHECK_INTERVAL but config.go renamed
that to CERTCTL_SCHEDULER_RENEWAL_CHECK_INTERVAL. Fixed in prose
+ the scheduler-loops table on line 1117.
- cat-g-b8f8f8796159: 6 env vars in config.go that were never
documented:
CERTCTL_DATABASE_MIGRATIONS_PATH
CERTCTL_JOB_AWAITING_APPROVAL_TIMEOUT
CERTCTL_JOB_AWAITING_CSR_TIMEOUT
CERTCTL_SCHEDULER_AGENT_HEALTH_CHECK_INTERVAL
CERTCTL_SCHEDULER_JOB_PROCESSOR_INTERVAL
CERTCTL_SCHEDULER_NOTIFICATION_PROCESS_INTERVAL
Added to the scheduler-loops table at features.md:1117 and
(DATABASE_MIGRATIONS_PATH) to the new Database Schema preamble.
- cat-g-163dae19bc59: 37 env vars in docs not defined in config.go.
The audit's strict comm over-flagged this set: most "phantoms"
are integration-surface contracts (script env vars certctl
EXPORTS to user-provided ACME DNS-01 / OpenSSL CA scripts;
StepCA / Webhook per-issuer-or-notifier config-blob field
names; CERTCTL_QA_* test fixtures; agent-side env vars defined
in cmd/agent/main.go). The closure narrows the gate to the
one true phantom (the rename) and allowlists the documented
integration contracts in the CI guard. Each allowlist entry
has a one-line justification.
CI regression guardrail:
- .github/workflows/ci.yml::"Forbidden env-var docs drift regression
guard (G-3)" — runs `comm -23` both ways between the env vars
defined in Go source (config.go + cmd/* + ACME DNS export +
test fixtures) and env vars mentioned in README + docs/ +
deploy/helm/. Fails the build if either set is non-empty modulo
the documented integration-surface allowlist.
Verification:
- comm -23 docs vs defined → empty post-fix (allowlist applied)
- comm -23 defined vs docs → empty post-fix
- golangci-lint v2.11.4 run ./... → 0 issues
- tsc --noEmit → clean
- S-1 stale-counts guardrail still passes
Audit findings closed:
- cat-g-163dae19bc59 (P2, docs-only env vars)
- cat-g-b8f8f8796159 (P2, config-only env vars)
- cat-g-renewal_check_interval_rename_drift (P2, renamed env var still in docs)
Deferred follow-ups:
- The 26 documented-but-unimplemented integration contracts on the
allowlist (CERTCTL_OPENSSL_*, CERTCTL_ACME_EAB_*, CERTCTL_WEBHOOK_*,
CERTCTL_AUDIT_EXCLUDE_PATHS, CERTCTL_TLS_*, CERTCTL_ACME_DNS_PROPAGATION_WAIT)
are documented in features.md / connectors.md / demo-advanced.md but
not yet read by any Go source. Either implement in config.go (each is
its own M-X) or delete from docs (separate cleanup PR). Neither
expansion fits inside G-3's "reconcile drift" scope.
|
||
|
shankar0123
|
530da674f8 |
docs(README,features,examples): replace stale source counts with rebuild commands (S-1 master)
Closes two 2026-04-24 audit findings — one P1 (cat-s1-9ce1cbe26876,
README + features.md cite stale numeric counts) and one P2
(cat-s1-features_md_issuer_count_contradiction, features.md self-
disagreed on issuer count saying 9 in two places + 12 in two others).
Both root in a CLAUDE.md invariant: "Numeric claims about current
state rot the instant the next release lands... Before adding any
current-state count, delete it and write the command instead."
Per-site changes:
- docs/features.md::"At a Glance" table — replaced 12 hardcoded counts
with `rebuild via <command>` references quoting the canonical
source-of-truth grep from CLAUDE.md::"Current-state commands".
- docs/features.md::Issuer Connectors section — dropped "9 issuer
connectors" (stale; live: 12) and "12 IssuerType constants" prose;
prose now references the rebuild command.
- docs/features.md::Target Connectors section — same treatment for
"14 target connector types".
- docs/features.md::"Per-type config schema validation for all 9
issuer types" — same treatment.
- docs/features.md::"80 MCP tools covering all API endpoints" — same.
- docs/features.md::Web Dashboard section — dropped "24 pages wired"
+ the "(25 Route elements, 24 pages)" comment.
- docs/examples.md::"Beyond These Examples" — dropped "7 issuer
backends and 10 target connectors" prose; references features.md
and the rebuild commands.
CI regression guardrail:
- .github/workflows/ci.yml::"Forbidden hardcoded source-count prose
regression guard (S-1)" — grep-fails the build if any of the
blocked phrases (e.g. "9 issuer connectors", "21 database tables",
"80 MCP tools") reappears in README or docs/. Allowlists demo-
fixture prose ("32 certificates" — seed_demo.sql facts), historical
WORKSPACE-CHANGELOG counts, the testing-guide example phrasing,
and any number adjacent to a quoted rebuild command.
Verification:
- S-1 guardrail dry-run on post-fix tree → empty (good)
- golangci-lint v2.11.4 run ./... → 0 issues
- tsc --noEmit → clean
- vitest, vite build unchanged from pre-S-1 baseline (no JS/TS touched)
Audit findings closed:
- cat-s1-9ce1cbe26876 (P1, README + features.md stale numeric counts)
- cat-s1-features_md_issuer_count_contradiction (P2, features.md
self-contradiction on issuer count)
Deferred follow-ups:
- WORKSPACE-CHANGELOG.md historical-milestone counts intentionally
preserved (those are point-in-time facts about shipped slices, not
current-state claims). README demo-fixture counts ("32 certs, 10
issuers") preserved — those describe the seed_demo.sql shape, not
the live source surface.
|
||
|
shankar0123
|
04c7eca615 |
docs: reconcile scheduler topology across sibling docs (7 → 12 loops)
Authoritative 12-loop table lives at docs/architecture.md:522-534 (committed via
the I-001/I-003/I-005 + M48/M50 milestone commits). This change brings six sibling
docs into parity with that table so every surface — user-facing features reference,
SOC 2 compliance mapping, connectors guide, advanced demo architecture diagram,
testing guide, and in-line architecture prose — reflects the same 8 always-on + 4
opt-in topology.
Touches:
- docs/architecture.md: 2 inline ordinal references (9th / 8th loop) replaced with
descriptive names (opt-in cloud discovery / opt-in endpoint health), cross-linked
to the authoritative table to prevent future ordinal rot.
- docs/features.md: metric row (7 → 12), inline reference to 9th loop, and full
scheduler table expanded to include Always-on column + env vars + I-001/I-003/I-005
refs.
- docs/compliance-soc2.md: background scheduler monitoring bullets expanded to list
all 12 loops with env vars + I-series refs; table row updated with 8 always-on +
4 opt-in summary.
- docs/connectors.md: three inline ordinals (7th/6th/9th loop) replaced with
descriptive names, cross-linked to architecture.md.
- docs/demo-advanced.md: Mermaid SCHED node label updated from '7 background loops'
to '12 background loops (8 always-on + 4 opt-in)'.
- docs/testing-guide.md: Test 20.1.1 header + grep pattern expanded to include
job-retry / job-timeout / notification-retry / digest / endpoint-health /
cloud-discovery loops; sign-off chart row label updated.
Pure documentation reconciliation. No code changes. Master HEAD pre-commit:
|
||
|
shankar0123
|
3287e174dc |
Unify API auth + RFC-compliant CRL/OCSP (M-002 + M-003 + M-006, auto-closes M-001)
Closes the remaining P1 gaps from coverage-gap-audit.md (M-001/M-002/M-003/M-006)
on top of the C-001/C-002 ownership + agent-FK contract fixes landed in
|
||
|
shankar0123
|
13cd4d98ba |
feat(V2.2): bulk revocation — filter-based fleet-wide certificate revocation
Add POST /api/v1/certificates/bulk-revoke with filter criteria (profile_id, owner_id, agent_id, issuer_id, team_id, certificate_ids), partial-failure tolerance, and audit trail. Includes MCP tool, CLI command (certs bulk-revoke), server-side bulk modal in GUI replacing client-side sequential loop, OpenAPI spec, compliance mapping updates, and 21 new tests (12 service, 7 handler, 1 CLI, 1 frontend). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
e1bcde4cf1 |
feat(M50): cloud secret manager discovery — AWS SM, Azure KV, GCP SM
Extend certificate discovery from filesystem + network to cloud secret managers. Three pluggable DiscoverySource connectors feed into the existing discovery pipeline via sentinel agent pattern, with a 9th scheduler loop for periodic cloud scanning. - AWS Secrets Manager: aws-sdk-go-v2, tag/prefix filtering, 10 tests - Azure Key Vault: stdlib HTTP + OAuth2, base64 DER/PEM, 16 tests - GCP Secret Manager: stdlib HTTP + JWT OAuth2, label filter, 14 tests - CloudDiscoveryService orchestrator with 9 tests - 9th scheduler loop (6h default, atomic.Bool idempotency) - Discovery page: color-coded source type badges - 14 new env vars across CloudDiscoveryConfig structs - Docs: connectors.md, architecture.md, features.md, README updated 49 new tests. All CI checks pass (go vet, race, lint, coverage). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
3f619bcaac |
feat(M49): Entrust, GlobalSign & EJBCA issuer connectors
Add three new issuer connectors completing commercial and open-source CA coverage. Entrust uses mTLS client certificate auth with sync/async issuance. GlobalSign Atlas uses mTLS + API key/secret dual auth with serial-based tracking. EJBCA supports dual auth (mTLS or OAuth2) for self-hosted Keyfactor CAs. Each connector implements the full issuer.Connector interface (9 methods), includes httptest-based unit tests (~14 each), and follows established patterns (injectable HTTP clients, RFC 5280 revocation reason mapping, CRL/OCSP delegated to CA). Also includes: issuer factory cases, env var seeding, config structs, domain types, seed data (3 rows, all disabled), OpenAPI enum updates, frontend issuer catalog entries with config fields, and full docs (connectors.md, architecture.md, features.md, README). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
596d86a206 |
feat(M48): continuous TLS health monitoring — endpoint state machine, shared tlsprobe, 8 API endpoints, GUI
Adds continuous TLS endpoint health monitoring that closes the deploy→verify→monitor loop. After M25 verifies a deployment succeeded once, M48 continuously confirms it stays healthy. Key components: - Shared `internal/tlsprobe/` package extracted from network scanner for reuse - Health status state machine: healthy → degraded (2 failures) → down (5 failures), plus cert_mismatch when served fingerprint differs from expected - 8th scheduler loop (60s tick, per-endpoint configurable intervals) - PostgreSQL migration 000011: endpoint_health_checks + endpoint_health_history tables - 8 REST API endpoints (CRUD, history, acknowledge, summary) - Health Monitor GUI page with summary bar, status table, create modal, auto-refresh - 38 new tests (5 tlsprobe + 11 domain + 10 service + 8 handler + 4 frontend) - All coverage thresholds maintained (service 68%, handler 83%, domain 87%, middleware 63%) Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
f2e60b93a3 |
feat(M11c): crypto policy enforcement — CSR validation, MaxTTL caps, key metadata
Enforce certificate profile crypto constraints across all 5 issuance paths (renewal, agent CSR, EST, SCEP). ValidateCSRAgainstProfile() rejects CSRs with key algorithm/size that don't match profile rules. MaxTTL enforcement caps certificate validity per issuer connector (Local CA, Vault, step-ca enforce directly; ACME/DigiCert/Sectigo pass through). Key algorithm and size are now persisted in certificate_versions for audit compliance. 16 new tests (12 service-layer + 4 Local CA connector). Removes hardcoded version number from GUI sidebar. Documentation updated across architecture, features, connectors, and README. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
bcefb11e65 |
feat(M51): add SCEP server (RFC 8894) for MDM and network device enrollment
Implements Simple Certificate Enrollment Protocol with single-endpoint operation-based dispatch (GetCACaps, GetCACert, PKIOperation), PKCS#7 SignedData CSR extraction with fallback for raw/base64 CSR, challenge password authentication via CSR attributes, and shared internal/pkcs7 package extracted from EST handler to eliminate code duplication. 24 new tests (11 service + 13 handler) plus 5 shared pkcs7 package tests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
c015cab2f4 |
docs: rewrite features.md, audit README + architecture against repo
Rewrote docs/features.md from scratch as authoritative feature inventory (1255 lines, every claim verified against source files). Audited README.md and architecture.md against repo — fixed 19 stale references: K8s Secrets status, issuer counts, dashboard page counts, CI thresholds, missing connectors in Mermaid diagrams, OpenAPI operation count, GetCACertPEM behavior, and V2/V4 roadmap accuracy. Also includes related fixes discovered during audit: - Scheduler skips expired/failed/revoked certs from auto-renewal - Seed demo expiry dates moved outside 31-day scheduler query window - Agent pages use correct last_heartbeat_at field name Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
cc03f55006 |
docs: comprehensive documentation audit — fix stale counts, V2/V3 matrix, connector status
- features.md: Fix Feature Matrix to correctly show all V2 Free features (F5/IIS/WinCertStore/JavaKeystore as Implemented, not Stub; Vault/DigiCert/ Sectigo/GoogleCAS as V2 Free, not V3 Paid). Add missing shipped features (EST, verification, export, S/MIME, ARI, digest, Helm, onboarding). Update issuer count to 9, target count to 13. - architecture.md: Fix F5/IIS from "interface only, implementation planned" to implemented. Add all 13 target connectors to built-in targets list. - why-certctl.md: Add Sectigo and Google CAS to issuer list (7→9). Fix target count (10→13). Remove hardcoded endpoint/operation counts. - connectors.md: Fix F5 BIG-IP TOC entry from "Interface Only" to "Implemented". Remove dead "Planned Issuers" TOC link. - README.md: Remove competitor product names (CertKit, KeyTalk). Remove hardcoded dashboard page count. Remove hardcoded endpoint counts. Fix V4 roadmap to remove already-shipped issuers (Sectigo, Google CAS). - Remove hardcoded MCP tool counts (78/80) across 8 files (mcp.md, architecture.md, features.md, testing-guide.md, concepts.md, quickstart.md, demo-advanced.md, why-certctl.md). Replace with "REST API exposed via MCP" to avoid future drift. - quickstart.md: Docker Compose environments table (from previous session). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
f92c997a50 |
feat(M45): ACME certificate profile selection, ARI RFC 9773 renumber, 45-day renewal positioning
Three related ACME ecosystem changes shipped as a single milestone: 1. ACME Certificate Profile Selection: Custom JWS-signed newOrder POST with `profile` field (e.g., `tlsserver`, `shortlived` for 6-day certs) bypassing acme.Client.AuthorizeOrder() since golang.org/x/crypto lacks profile support. ES256 JWS signing with kid mode, nonce management, directory discovery. Empty profile delegates to standard library path (zero behavior change). Configurable via CERTCTL_ACME_PROFILE env var. GUI: profile dropdown on ACME issuer config. 2. ARI RFC 9702 → 9773 Renumber: All 25+ references updated across Go source, docs, README, and examples. Zero remaining occurrences of RFC 9702. 3. 45-Day / Short-Lived Certificate Positioning: 5 domain tests validating renewal thresholds against SC-081v3 validity reduction timeline (200→100→47 days) and Let's Encrypt 45-day/6-day profiles. ARI (RFC 9773) is the expected renewal path for 6-day shortlived certs. New tests: 13 profile + 5 domain threshold + 1 frontend = 19 new tests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
e19b8c95fe |
docs: remove hardcoded test counts from public-facing docs
Replace brittle test count numbers (1,554+, 1,088+, 211, etc.) with descriptions of testing approach and CI-enforced coverage gates. Counts go stale every milestone — coverage thresholds are machine- verified and never drift. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
4c3b7cbb16 |
docs: fix stale references, seed data case bugs, and convert ASCII diagrams to Mermaid
Audit all docs and examples against current codebase state. Fix seed_demo.sql domain constant casing (IssuerType, TargetType, AgentStatus) that would cause agent dispatch failures. Fix example docker-compose health endpoints (/health not /api/v1/health) and env var names (CERTCTL_DATABASE_URL). Update connector counts, test numbers, and planned→implemented status across docs. Convert 3 ASCII flow diagrams to Mermaid. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
6c8d4eca40 |
feat: frontend audit fixes, README accuracy pass, doc updates
Frontend audit (10 categories): lifecycle fields in types, new API functions (CRL, OCSP, deployments, updateIssuer/Target, getPolicy), issuer/owner/profile filters on CertificatesPage, last_renewal_at column, error_message column on JobsPage, full crypto policy UI on ProfilesPage (key algorithms, EKUs, SAN patterns), key info + CA badge on DiscoveryPage, edit modal on TargetDetailPage, tags field on certificate creation, darwin→macOS mapping on AgentFleetPage. 211 Vitest tests passing. README accuracy: test counts (1300+ Go, 211 frontend), page count (24), demo data (32 certs, 7 issuers, 180 days), endpoint count (97), MCP tools (80), CLI subcommands (10), moved shipped items out of "Coming in v2.1.0". Docs: architecture.md diagrams updated (Vault PKI, DigiCert, Traefik, Caddy added), features.md Vault/DigiCert status updated. Version bumped to v2.0.20. cli binary removed from git tracking. Testing guide Part 41 added (12 auto + 9 manual tests). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
bcf2c3ae92 |
feat(pre-2.1.0): demo data overhaul, examples, migration guides, install script
Pre-2.1.0 adoption polish delivering all four milestones: A) Demo Data Overhaul — seed_demo.sql rewritten with 35 certs across 5 issuers, 8 agents, 8 targets, 50+ jobs spanning 90 days, 55+ audit events, discovery scans, network scan targets, S/MIME cert. B) Examples Directory — 5 turnkey docker-compose configs: acme-nginx, acme-wildcard-dns01, private-ca-traefik, step-ca-haproxy, multi-issuer. C) Migration Guides — migrate-from-certbot.md, migrate-from-acmesh.md, certctl-for-cert-manager-users.md. D) Agent Install Script — install-agent.sh with cross-platform support (Linux systemd + macOS launchd), release.yml updated for 6-target cross-compilation. Triple-audited against codebase: 22 factual corrections applied across docs, examples, and config (env var names, CLI flags, ports, DNS hook interface, scheduler loop counts, license conversion date). Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
ec21c9bb29 |
feat(m28+m29+m30): ACME ARI, email digest, and Helm chart
M28: ACME Renewal Information (RFC 9702) — CA-directed renewal timing with cert ID computation, directory endpoint discovery, graceful degradation for non-ARI CAs. 19 tests. M29: Email notifier wiring + scheduled certificate digest — SMTP connector bridged to service layer via NotifierAdapter, DigestService with HTML email template, 7th scheduler loop (24h), digest preview/send API endpoints and GUI card. 21 tests. M30: Production-ready Helm chart — server Deployment, PostgreSQL StatefulSet, agent DaemonSet, ConfigMaps, Secrets, Ingress, security contexts, health probes, example values for dev/prod/ACME scenarios. Also: OpenAPI spec updates, MCP tool additions, CI helm-lint job, documentation updates across 5 doc files and README. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
a00bb349c4 |
feat(m27): certificate export (PEM/PKCS#12) and S/MIME EKU support
Add certificate export in PEM (JSON or file download) and PKCS#12 formats. Private keys are never included — they stay on agents. Add EKU-aware issuance threading profile EKUs (serverAuth, clientAuth, codeSigning, emailProtection, timeStamping) through the full issuance pipeline. Fix agent CSR SAN splitting for email addresses, adaptive KeyUsage flags for S/MIME vs TLS, and a pre-existing generateID collision bug in deployment job creation. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
305c7dc851 |
docs: update project documentation to reflect security remediation
Update README, architecture guide, and feature inventory to document all changes from the security remediation pass (17 tickets): - README: Add CI pipeline section (race detection, golangci-lint, govulncheck, per-layer coverage thresholds), CORS deny-by-default behavior, input validation, SSRF protection, scheduler concurrency safety. Update test count to 1050+. Add race detection and govulncheck to development commands. - Architecture guide: Update testing strategy with scheduler tests, fuzz tests, and revised CI pipeline description. Add security model sections for input validation, CORS, and concurrency safety. Update test count. - Feature inventory: Document CORS deny-by-default behavior. - SECURITY_REMEDIATION.md: New file documenting all 17 remediated tickets with CWE classifications, before/after behavior, 3 deferred tickets with rationale, CI pipeline changes, and breaking CORS change. Missing docs flagged as future additions: - Formal threat model document - Disaster recovery runbook - Version upgrade guide - Capacity planning benchmarks Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
be72627aeb |
feat: M25 post-deployment TLS verification + M26 Traefik/Caddy targets
M25: After deploying a certificate, the agent probes the live TLS
endpoint and compares SHA-256 fingerprints to verify the correct cert
is being served. Best-effort — failures don't block deployments.
New endpoints: POST /jobs/{id}/verify, GET /jobs/{id}/verification.
Migration 000008 adds verification columns to jobs table.
M26: Traefik target connector (file provider, auto-reload) and Caddy
target connector (dual-mode: admin API hot-reload or file-based).
Both wired into agent dispatch.
Also: restructured README to highlight supported integrations (issuers,
targets, notifiers) earlier, moved API/CLI/MCP sections lower. Updated
all docs (features, connectors, architecture, testing guide, why-certctl)
and fixed integration tests for 18-param RegisterHandlers signature.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
||
|
shankar0123
|
e19c240a79 |
feat: add ACME DNS-PERSIST-01 challenge support (IETF draft-ietf-acme-dns-persist)
Standing TXT record at _validation-persist.<domain> eliminates per-renewal DNS updates. Auto-fallback to dns-01 if CA doesn't offer dns-persist-01. ScriptDNSSolver extended with PresentPersist method. Configurable via CERTCTL_ACME_CHALLENGE_TYPE=dns-persist-01 and CERTCTL_ACME_DNS_PERSIST_ISSUER_DOMAIN env vars. Also fixes IsExpired edge-case test in discovery_test.go that always failed due to time.Now() drift between test setup and method invocation. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
09c819d424 |
docs: add Scarf Docker pull URLs across README, release workflow, and features
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
7d14635a72 |
feat: add EST server (RFC 7030) for device certificate enrollment (M23)
Implement Enrollment over Secure Transport protocol with 4 endpoints under /.well-known/est/ — cacerts (CA chain distribution), simpleenroll (initial enrollment), simplereenroll (certificate renewal), and csrattrs (CSR attributes). PKCS#7 certs-only wire format with hand-rolled ASN.1, accepts both PEM and base64-encoded DER CSRs, configurable issuer and profile binding, full audit trail. 28 new tests (18 handler + 10 service). Also includes: - GetCACertPEM added to issuer connector interface (all 4 issuers updated) - EST integration tests wired into e2e test suite (13 test cases) - QA testing guide Part 26 (15 manual EST test cases) - All docs updated: README, features, architecture, concepts, connectors, quickstart, demo-advanced (endpoint counts, MCP wording, agent IDs, issuer interface, resource lists, OpenSSL status) Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
0f4a1b268b |
fix: handle 204 No Content in fetchJSON, add FK-aware delete errors, v2 screenshots
Frontend: fetchJSON now returns empty object on 204 instead of failing to parse empty body — fixes silent delete failures across all entities. Added onError callbacks to owner/team delete mutations to surface errors. Backend: owner and issuer delete handlers return 409 Conflict with descriptive messages when FK constraints block deletion, instead of generic 500. Added 15 v2 dashboard screenshots, updated README screenshot section, logo asset, page count references (18→full), and QA guide with FK constraint test coverage. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
72cda5877a |
docs: fix 16 discrepancies found by cross-validating all docs against source code
CLI syntax corrected across 5 files (concepts, demo-guide, demo-advanced, architecture, features): list-certs→certs list, get-cert→certs get, etc. Removed non-existent health/metrics commands, replaced with status. Subcommand count 10→12 everywhere. architecture.md: Go 1.22→1.25, endpoint count 91→93, ER diagram expanded from 15 to 21 tables (added renewal_policies, certificate_revocations, discovered_certificates, discovery_scans, network_scan_targets). connectors.md: added GenerateCRL and SignOCSPResponse to issuer interface, added Email and Webhook rows to notifier config table. compliance docs: fixed keygen warning messages to match actual log output, CERTCTL_STEPCA_PROVISIONER_KEY→CERTCTL_STEPCA_KEY_PATH, openssl genrsa→ crypto/ecdsa.GenerateKey, CERTCTL_SERVER_ADDR→CERTCTL_SERVER_HOST+PORT. README.md: v2.0.0 version bump, solo developer mention, feature list, table of contents, documentation table moved to top, 7 fact-check fixes. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
6c10c33572 |
docs: complete V2 audit remediation — OpenAPI spec, demos, and features
- Add 15 missing operations to openapi.yaml (M18b discovery, M20 deployments, M21 network scan, M22 Prometheus) — spec now has 93 operations matching all 93 router routes - Add 6 new component schemas (DiscoveredCertificate, DiscoveryScan, DiscoveryReport, NetworkScanTarget, NetworkScanTargetCreate, StatusMessageResponse) - Add Discovery and Network Scan tags to OpenAPI spec - Fix stale "Prometheus format deferred to V3" claim in metrics description - Add Part 4.5 (Target CRUD) to demo-advanced.md with create/update/delete curl examples - Expand Certificate Profiles section in features.md with list/get/update curl examples - Add Deployment Trigger section to features.md with curl examples - Add discovery-summary and discovery-scans curl examples to features.md - Remove 3 empty directories (internal/agent/, internal/audit/, internal/policy/) - Update features.md OpenAPI scope from "78 documented" to "93 operations" Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
a4622d5e9a |
fix: correct stale counts across all docs (tables 19→21, MCP tools 76→78, tests 860→900+)
V2 audit found 3 critical number mismatches propagated across 8 files: - Table count was 19 everywhere but actual migrations create 21 tables - MCP tool count was 76 but tools.go registers 78 (M21/M22 additions) - README MCP breakdown claimed 83 tools with math summing to 90 - architecture.md still had stale 860+ test count - features.md OpenAPI claim said 93 ops but spec has 78 - mcp.md tool-per-domain table had wrong counts in 10 of 16 rows - Added 3 network_scan_targets to seed_demo.sql for demo completeness - Added curl examples to Agent Groups section in features.md Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
41d5f2d2ea |
docs: add value context, usage examples, and fix stale counts in features.md
Every major section now explains why the feature matters (not just what it does) with concrete curl examples. Fixes stale counts: 84→91 endpoints, 18→19 tables, 860→900+ tests, 85→93 OpenAPI operations. Adds network scan env vars to config reference and M21/M22 rows to feature matrix. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
4f90be9311 |
feat: add network certificate discovery (M21) and Prometheus metrics (M22)
M21 adds server-side active TLS scanning of CIDR ranges with concurrent probing, sentinel agent pattern for pipeline reuse, and full CRUD API for scan targets. M22 adds Prometheus exposition format endpoint alongside existing JSON metrics. Comprehensive documentation audit updates all docs to reflect 91 endpoints, 19 tables, 6 scheduler loops, and 900+ tests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
7bf20fce85 |
docs: add compliance mapping guides and comprehensive documentation audit
Add SOC 2 Type II, PCI-DSS 4.0, and NIST SP 800-57 compliance mapping guides — the final V2 deliverable. All claims verified against actual codebase (router.go, config.go, main.go). Also audit and update all existing docs: fix endpoint/tool/test counts in features.md, expand demo-guide.md and demo-advanced.md with CLI/MCP/discovery coverage, update connectors.md F5/IIS status to V3 paid, add compliance reference to architecture.md. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
shankar0123
|
667a30870d |
feat: M18b Filesystem Certificate Discovery — agent scanning, server dedup, triage API
Agent-side:
- Filesystem scanner walks configured directories (CERTCTL_DISCOVERY_DIRS)
- Parses PEM (.pem, .crt, .cer, .cert) and DER (.der) certificate files
- Extracts CN, SANs, serial, issuer/subject DN, validity, key info, SHA-256 fingerprint
- Reports discoveries to control plane on startup + every 6 hours
- Skips files >1MB and private key files
Server-side:
- Migration 000006: discovered_certificates + discovery_scans tables
- Domain model: DiscoveredCertificate, DiscoveryScan, DiscoveryReport
- Three triage states: Unmanaged, Managed (claimed), Dismissed
- Repository with upsert dedup (fingerprint + agent + path)
- Service layer: process reports, claim, dismiss, list, summary
- 7 new API endpoints (84 total):
POST /agents/{id}/discoveries, GET /discovered-certificates,
GET /discovered-certificates/{id}, POST .../claim, POST .../dismiss,
GET /discovery-scans, GET /discovery-summary
- Audit trail: scan_completed, cert_claimed, cert_dismissed events
Tests: 28 new test functions (domain, handler, service layers)
Docs: README, quickstart, demo-guide, demo-advanced, architecture,
concepts, connectors, features.md all updated
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
|
||
|
shankar0123
|
8768a7b3ef |
docs: add feature inventory, complete demo-advanced and architecture coverage
- Create docs/features.md — comprehensive V2 feature inventory (15+ sections covering all 77 endpoints, 4 issuers, 5 targets, 6 notifiers, profiles, agent groups, revocation, observability, CLI, MCP, and configuration) - Update docs/demo-advanced.md — add Parts 10-13 (Certificate Profiles, Agent Groups, Interactive Approval, Advanced Query Features), fix notification channel count (2→6), fix scheduler loop count (4→5), update architecture summary flowchart - Update docs/architecture.md — add revocation data flow diagram (Section 3.5), profile enforcement note, M20 Enhanced Query API section, OpenAPI spec reference, CLI Tool section, update connector test counts (23→57), add e2e_test.go mention Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |